SSD1306 White 0.96″ 128×64 OLED Display – I2C Interface
$35.42
$55.26
Description Tiny 128×64 is a OLED Display based on SSD1306 Display controller chip. The display is mounted on an easy to solder PCB. The SSD1306 Display interfaces to microcontrollers through a I2C serial bus interface. Technical Specifications OLED Technology, Self-luminous, need no back-light (consumes less energy) High resolution: 128 * 64 Viewing angle:> 160 degree Supports various microcontrollers: Fully compatible with Raspberry Pi, Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.08W Operating Voltage: 3.3V Nominal (1.65V to 3.3V) Working Temperature: :-30 ~70 celcius Module Size: 27.0MM * 27.0MM * 4.1MM I2C/IIC Interface, needs only 2 IO pins. 4.7k pull-up resistors are needed on both SDA and SCL lines. Driver IC: SSD1306 Pixel color: White Pinouts VCC (3.3V ~ 5V) GND SCL SDA Documents SSD1306 Display Controller Datasheet Firmware Library (u8glib) Arduino Library: Link1, Link2 Adafruit SSD1306 library ARM Library AVR Library Important Note Make sure you are correctly setting the contrast value of the LCD (by writing to command register ) or you will be able to see very dim or nothing at all on the LCD. When you are using u8glib, please make sure that you un-comment following statement: //U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE|U8G_I2C_OPT_DEV_0); // I2C / TWI In case of connection with NodeMCU Modules please follow following default pinouts with Adafruit library I2C-SDA – D2/GPIO4 I2C-SCL – D1/GPIO5 Package Includes 1x SSD1306 White OLED Display Module with I2C Interface (QC-OK/Tested)
