Description Chip on Glass (COG) 128×64 pixel SPI Interface LCD Display Module. Perfect for interface with Arduino, NodeMCU, WeMOS D1, ESP8266, ESP32 modules. Technical Specifications Outer Module Dimensions: 43.5mm x 40.8mm x 4.5mm (L x W x H) Display Area Dimensions: 37mm x 23mm Interface Type: SPI Operating Voltage: 5V or 3.3V Supply LEDA: 5V, or 3.3V same as VDD Pixel Color: Black LED Back light Color: White Documents Datasheet MSP430 Library Arduino Library Important Note Make sure you are correctly setting the contrast value of the LCD (by writing to command register ) or you will be able to see very dark, or very dim or nothing at all on the LCD. To use with ESP8266 / NodeMCU over Software SPI interface use following initialization statement: U8G2_ST7567_JLX12864_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ D5, /* data=*/ D7, /* cs=*/ D8, /* dc=*/ D0, /* reset=*/ D1); //NodeMCU SW SPI example OR U8G2_ST7567_JLX12864_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ D5, /* data=*/ D7, /* cs=*/ D8, /* dc=*/ D0); //NodeMCU SW SPI example – LCD RESET Connect with NODEMCU RST pin To use with ESP8266 / NodeMCU over Hardware SPI interface use following initialization statement: (U8G2_R0, /* cs=*/ D8, /* dc=*/ D0); //NodeMCU SPI Example – LCD RESET Connect with NODEMCU RST pin OR U8G2_ST7567_JLX12864_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ D8, /* dc=*/ D0, /* reset=*/ D1); //NodeMCU SPI Example Package Includes 1x COG JLX12864G-086 128×64 LCD Module (QC-OK / Tested)
