SSD1306 White 0.91″ 128×32 OLED Display – I2C Interface
$53.85
$94.78
Description Tiny 128×32 is a OLED Display based on SSD1306 Display controller chip. The display is mounted on an easy to solder PCB. The SSD1306 Display interfaces to microcontrollers through a I2C serial bus interface. Technical Specifications OLED Technology, Self-luminous, need no back-light (consumes less energy) High resolution: 128 * 32 Viewing angle:> 160 degree Supports various microcontrollers: Fully compatible with Raspberry Pi, Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.08W Operating Voltage: DC 3.3 ~5v Working Temperature: :-30 ~70 celcius Module Size: 38.0MM * 11.9MM * 3.9MM (excluding header height) I2C/IIC Interface, needs only 2 IO pins. 4.7k pull-up resistors are needed on both SDA and SCL lines. Driver IC: SSD1306 Pixel color: White Pinouts GND VCC (DC 3.3 ~5v) SCL SDA Documents and Downloads SSD1306 Display Controller Datasheet Arduino Library: Link1, Link2 Adafruit SSD1306 library also install Adafruit GFX library ARM Library AVR Library I2C Scanner that works with Arduino and ESP8266 modules Important Note Make sure you are correctly setting the contrast value of the LCD (by writing to command register ) or you will be able to see very dim or nothing at all on the LCD. When you are using u8glib, please make sure that you un-comment following statement: //U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE|U8G_I2C_OPT_DEV_0); // I2C / TWI In case of connection with NodeMCU Modules please follow following default pinouts with Adafruit library I2C-SDA – D2/GPIO4 I2C-SCL – D1/GPIO5 Package Includes 1x SSD1306 White 0.91″ 128×32 OLED Display – I2C Interface (QC-OK / Tested)
