Description The ESP8266MOD/ESP-12F is based on Popular ESP8266 WiFi chip and features an on-board PCB antenna. Features Low Power 32 Bit CPU with up-to 160MHz clock Built-in 10-Bit ADC Interface: UART / GPIO / ADC / PWM / I2C Integrated WIFI, MAC/BB/RF/PA/LNA UART Baudrate upto 4Mbps Certifications: FCC, CE, IC, REACH, RoHS AT Command supported Technical Specification Model: ESP8266MOD / ESP-12F Size: 24 x 16 x 3 (±0.2)mm IO Port: 9 Operating Voltage : 2.7v to 3.6V (3.3V Nominal) Flash Size : 32Mbit (4M Byte) ADC Input Range: 0-1v RESET: Active Low Chip Enable (EN) : Active High Maximum Transmit Power: 802.11B: 16 /-2 dBm @11Mbps 802.11g: 14 /-2 dBm @54Mbps 802.11n: 13 /-2 dBm @HT20, MCS7 Power Continuous transmission : Average 0.71A, Peak 0.5A Sleep: ~20mA Light Sleep: ~2mA Deep Sleep: ~0.02mA Operating Temperature: -20c TO 85C Buy Adapter plate for ESP-12F here Documents and Downloads Get started in Arduino Get started in NodeMCU Revert to the Factory Firmware (AT) ESP8266MOD / ESP12F Datasheet ESP Easy is a free and open source MCU firmware for the Internet of things (IoT) and originally developed by the LetsControlIt.com community Package Includes 1x Ai-Thinker ESP-12F/ESP8266MOD 4MB (32Mbit) flash WiFi Module with on board pcb Antenna
