APDS-9930 Digital Proximity, Ambient Light Sensor, Gesture Sensor Module

Description Description The APDS-9930 provides digital ambient light sensing (ALS), IR LED and a complete proximity detection system in a single 8 pin package. The proximity function offers plug and play detection to 100 mm (without front glass) thus eliminating the need for factory calibration of the end equipment or sub-assembly. Features ALS, IR LED and Proximity Detector in an Optical Module • Ambient Light Sensing (ALS) – Approximates Human Eye Response – Programmable Interrupt Function with Upper and Lower Threshold – Up to 16-Bit Resolution – High Sensitivity Operates Behind Darkened Glass – Low Lux Performance at 0.01 lux • Proximity Detection – Fully Calibrated to 100 mm Detection – Integrated IR LED and Synchronous LED Driver – Eliminates “Factory Calibration” of Prox • Programmable Wait Timer – Wait State Power – 90 μA Typical – Programmable from 2.7 ms to > 8 sec • I2C Interface Compatible – Up to 400 kHz (I2C Fast-Mode) – Dedicated Interrupt Pin • Sleep Mode Power – 2.2 μA Typical Applications Cell Phone Backlight Dimming Cell Phone Touch-screen Disable Notebook/Monitor Security Automatic Speakerphone Enable Automatic Menu Pop-up Digital Camera Eye Sensor Technical Specifications Board Dimensions: 18.0mm (L) x 15.4mm (W) Weight: 1.0g (without headers); ~1.30g (Including header) Operating Voltage Min: 2.2V Nom: 3.0V – 3.3V Max: 3.6V Interface : I2C I2C Address: 0x39 (Hex) or 57 (Dec) Pinouts Pin1 – VL: IR LED Anode Pin Pin2 – GND: Power Reference Ground Pin3 – VCC : Power Input Pin4 – SDA : I2C Data Pin5 – SCL : I2C Clock (Max : 400Khz) Pin6 – INT: Interrupt Documents and Downloads APDS-9930 Instructable APDS-9930 Arduino Library Package Includes 1x APDS-9930 Module