USB to TTL Adapter Based on FT232RL with 3.3V/5.0V Selection Jumper

Description A USB/TTL converter based on FT232RL high quality, high performance USB-to-Serial Bridge Controller. FT232RL chip is produced by FTDI which is famous manufacturer for USB/TTL converter products.The FT232R is the latest device to be added to FTDI’s range of USB UART interface Integrated Circuit Devices. Features Supports Windows 8, Windows 7,  Windows Vista, Windows XP, Linux, Mac OS X, Windows CE 4.2-5.2, Windows CE 6.0 DTR and CTS pins. DTR pin can be used for Automatic Reset of Arduino Pro Mini boards while code download. 3.3V and 5.0V signal Level Support using standard Through Hole jumper. Technical Specifications Voltage Level on RXD, TXD pins: 5.0V (Default), 3.3V through standard jumper. USB Connector type: USB-Type C Chip Used: FT232RL Supported OS: Windows 8, Windows 7,  Windows Vista, Windows XP, Linux, Mac OS X, Windows CE 4.2-5.2, Windows CE 6.0 Pinouts GND CTS VCC (3.3V / 5V) TX RX DTR Applications Programming of Arduino Pro Mini with Automatic RESET through DTR pin Programming of Microcontrollers that can be programmed using serial boot loaders at 3.3V or 5.0V logic levels Burn write STC MCU,NXP MCU,renesas MCU,NEC MCU Data exchange between microcontroller and Desktop or Laptop Computers Connection with GPS Devices Connection with various external Phones, or modems, GSM Modules All other applications requiring USB/Serial/TTL interface. Router,HDD,ADSL,broad band modem firmware upgrade Cellphone,XBOX360,GPS serial communication,vehicle inspection and test, dvd flash and so on Simple UART communication,commonly used UART debugging tools in supper terminal USB signal transferred to TTL signal,may be used by electronic enthusiasts Two data transmission indicator can monitor data transfer status in real time 3.3V and 5V power supply interface,easy for the DDWRT of different voltage system that need power.   Related Documents and Downloads Chip Datasheet: FT232R Datasheet Download Driver: Link to download page Related Software: Bray Terminal: https://sites.google.com/site/terminalbpp/ Package Includes 1x USB to TTL Adapter Based on FT232RL (Tested / QC-OK) 1x Standard Jumper (for 3.3V/5.0V selection)