ESP32-CAM WiFi bluetooth Camera Module

ESP32-CAM WiFi bluetooth Camera Module ESP32-CAM WiFi Description: Modle: ESP32-CAM Operating Voltage: 5V SPI Flash: 32 Mbit RAM: Inter 520KB , External 4M PSRAM Bluetooth: BLuetooth 4.2 BR/EDR & BLE standard WIFI: 802.11/b/g/n/e/i Port: UART, SPI, I2C, PWM IO Port: 9 Serial port rate: 115200 bps Picture form: JPEG (only OV2640 support), BMP, GRAYSCALE Spectrum range: 2412 -2484MHz Antanna: Onboard PCB Antanna 2dBi Security: WPA/WPA2/WPA2-Enterprise/WPS Operating Temperature: -20 -85 Degrees Celsius Storage Tepmerature: -40 -90 Degrees Celsius, <90%RH Transmit power: 802.11b: 17 /-2 dBm (@11Mbps) 802.11g: 14 /-2 dBm (@54Mbps) 802.11n: 13 /-2 dBm (@MSC7) Receive Sensitivity: CCK, 1 Mbps: -90dBm CCK, 11 Mbps: -85dBm 6 Mbps(1/2 BPSK): -88dBm 54 Mbps (3/4 64-QAM): -70dBm MCS7 (65 Mbps, 72.2 Mbps): -67dBm [ESP32-S] The main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and a computing power of up to 600DMIPS. Default 32Mbit SPI Flash, 520KB SRAM Support SoftAP and Station mode Ultra-small 802.11b/g/n Wi-Fi BT/BLE SoC module Support UART/SPI/I2C/I2S/PWM/ADC/DAC, etc. Support for firmware upgrade (FOTA) Antenna supports on-board antenna or IPEX block output [OV2640 Camera Module] Feature: The OV2640 image sensor features 2 megapixels (1632×1232 pixels) Small size, low operating voltage, and provides all the features of a single chip UXGA camera and image processor. Through the SCCB control, you can output the entire frame, sub-sampling, take the window, and a variety of resolution 10-bit sampling data. The product UXGA images up to 15 frames per second. The user can fully control the image quality, data format and transmission mode. Specification: High sensitivity for low-light applications Low voltage for embedded applications Standard SCCB interface, compatible with I2C interface RawRGB, RGB (GRB4: 2: 2, RGB565 / 555/444), YUV (4: 2: 2) and YCbCr (4: 2: 2) output format Supports UXGA, SXGA, VGA, QVGA, QQVGA, CIF, QCIF and up to 40×30 size Supports VarioPixel sub sampling mode Automatic impact control functions include: automatic exposure control, Automatic gain control, automatic white balance, automatic elimination of light stripes, automatic black level calibration. Image quality control including color saturation, hue, gamma, sharpness ANTI_BLOOM ISP with noise cancellation and dead pixel compensation Support image scaling Lens loss compensation Saturation automatic adjustment Edge enhancement automatic adjustment Noise reduction automatic adjustment Sensing array 1632×1232 Maximum format UXGA IO Voltage 1.7V -3.3V Analog voltage 2.5 -3.0V (internal LDO to power supply 1.2V) Power consumption TBD sleep<20μA Temperature operation -30 ℃ to 70 ℃ Stable working 0 ℃ to 50 ℃ Output format (8-bit) YUV / YCbCr4: 2: 2 RGB565 / 555/444 GRB4: 2: 2 Raw RGB Data Optical size 1/4″ Viewing angle 25 Degree Maximum rate 15fps SXGA sensitivity 1.3V / (Lux-sec ) Signal to noise ratio 40dB Dynamic range 50 dB View mode Progressive electron exposure 1 line to 1247 lines Pixel area 2.2 μm x 2.2 μm Dark current 15 mV / s at 60 °C Package include: 1 x ESP32-CAM 1 x OV2640 Camera Module SKU: CE-M0133 Category: IoT & Wireless Tags: camera module, ESP 32, esp with cam, esp32, OV2640, wifi camera