Description Description The 100W 5A USB Type-C QC (Quick Charge) Decoy Trigger Board is an electronic circuit board that allows devices to trigger USB Type-C power supplies to deliver power up to 100W and 5A. The board is designed to work as a “decoy” device, which means that it can negotiate with a USB Type-C power supply to provide power delivery (PD) to a connected device. The 100W 5A USB Type-C QC Decoy Trigger Board includes a USB Type-C port for connecting to a USB Type-C power supply, and a power output port for connecting to a device that requires power. The board also features a microcontroller and a set of firmware that can communicate with USB Type-C power supplies to negotiate the correct voltage and current levels for the connected device. Overall, the 100W 5A USB Type-C QC Decoy Trigger Board is a useful tool for electronics enthusiasts and makers who want to experiment with USB Type-C power delivery, or to create custom charging solutions for high-power devices. Features It supports PD3.0 and PD2.0 voltage deception output, and the mode can be switched freely. It has a key lock function to prevent incorrect operation. It has an LED output indicator to show the working status. The parameters are automatically saved, and the last decoy setting is executed when the power is turned on again. Ultra-low power consumption, support 100W output. Technical Specifications Product Name:PD2.0/3.0 Decoy Input Voltage: DC 5V Deceive Output Voltage:5V>9V>12V>15V>20V Maximum Output Voltage:20V Maximum Output Current:5A Work Temperature:-25℃~85℃ Work Humidity:5%~95%RH Size:44 x 20 x 15mm Instructions for Use (must use a power supply with PD protocol) Press and hold the S- button, then insert the module into the power supply, and then reset to 5V output (“>>” means power on). Press and hold the S button, and then insert the module into the power supply. At this time, switch whether to turn on the key lock and save the state after power-on.If the key lock is unlocked, it must be unlocked to adjust the voltage after power-on to prevent incorrect operation. After power on, press and hold S button without letting go, then press S- button, and unlock when there is a button lock. After powering on, press and hold S- button without letting go, then press S button to lock the button. Quick start: Plug the board into the PD power supply. At this time, the LED light indicates the current setting decoy voltage. If it is not on,it is the default 5V. Adjust the output voltage: The board is locked by default, and you need to unlock it first. The method is to press and hold S button and then press S- button. At this time, the unlocking is complete and you can release the button. Then click S button to increase the voltage or click S- button to decrease the voltage. Instructions for Use of Test Function Press S- button and S button at the same time and then power on,the module enters the test mode,and the output voltage will automatically cycle from 5V>9V>12V>15V>20V.The voltage change time can be adjusted by S button and S-button,in seconds. This function is a test function,the mode is not saved,and the switching time can be saved. Interface Description Type-C Interfeace Male: Type-C male connector: Connect PD power supply as input, which can input 20V 5A voltage and current. Type-C Interfeace Female: Used as an input to connect to a PD power supply, or as an output interface, which can output 20V 5A voltage and current. USB-A Female Interface: As an output interface, it can output 20V 3A voltage and current. Positive and negative wiring pads: as an output interface, it can output 20V 5A voltage and current. Applications The board is typically used by electronics enthusiasts and makers who want to experiment with USB Type-C power delivery, or to create their own charging solutions for devices that require high power charging. The board is compatible with USB Type-C power supplies that support the USB-PD (Power Delivery) standard, which is a specification for high-power charging over USB Type-C cables. Package includes 1x 100W 5A USB Type-C QC Decoy Trigger Board 5V 9V 12V 15V 20V Output Module Art of Circuits is Pakistan Popular store that brings Innovative Embedded Modules, Sensors and other Electronics products in Pakistan. Join Art of Circuits on Facebook Follow Art of Circuits on Twitter
